Skip to content
Standard Aluminum Products Inc.
  • Catalogue
    • Swing Doors
      • 175 Narrow Stile Door
      • 275 Institutional Doors
      • 350 Medium Stile Door
      • 500 Wide Stile Door
      • Thresholds & Mid-Panels
      • 200T Narrow Stile T.B. Door
      • 500T Wide Stile T.B. Door
      • T.B. Door Mid Panels & Thresholds
      • Hardware Locations & Door Swings
    • Sliding/Folding Doors
      • SD1750 Mall Sliders
      • SD 2000 Top Hung Slider
      • BF 2000 Bi-Fold Doors
    • Storefront
      • 450 Series – Flushed Glazed
      • 550 Series – Flushed Glazed
      • 550T Series – Flushed Glazed
    • Window Systems
      • 350T Series Flushed Glazed Ribbon
      • 1350T Series 3 1/2″ Strip
      • 600T T.B. Vent
    • Curtain Wall
      • 2040T Series T.B.
      • 2540 Series High-Span
      • 2550 Series High-Span
      • 2550T Series T.B.
    • Door Hardware
      • Pivots
      • Hinges
      • Locks & Latches
      • Electric Strike
      • Exit Devices
      • Closers – Surface Mounted
      • Closers – Concealed Overhead
      • Closers – Concealed Overhead Pivots
      • Closer – Concealed Floor
      • Push-Pull Handles
      • Weatherstripping
      • Miscellaneous
    • Skylight Systems
      • 275 T-Bar Skylight
    • Miscellaneous Sash, Tubes & Channels
  • About
  • Contact Us

Closers – Concealed Overhead

  • Home
  • Catalogue
  • Door Hardware
  • Closers – Concealed Overhead
RTS-88 – OVERHEAD CONCEALED Ideal for both interior and exterior applications. It handles center hung single or double acting doors, or independently hung single acting. Compact closer body is designed to fit into headers as small as 1.75 x 4 inches. Closer body is non handed. Accommodates a maximum door weight of 250lbs. A mechanical back check slows down the door prior to contact with the positive stop. The standard RTS 88 is furnished without hold open. Optional single point mechanical hold open is available at 90 or 105 degree.
8812 – OFFSET SLIDE ARM Offset slide arm and channel. Hung on offset pivots, 4 wide butt hinges or continuous gear hinges.
8831 – SIDE LOAD ARM Standard side load top arm.
8836 – END LOAD ARM End load top arm.

Standard Aluminum Products using

Construction Field by Acme Themes
  • Catalogue
  • About
  • Contact Us

Request a Quote